50 TOP Real Time HTML Interview Questions and Answers pdf download

Read the most frequently asked 50 top HTML interview questions and answers for freshers and experienced job interview questions pdf

HTML Interview Questions and Answers List

1. What is HTML?
HyperText is the method by which you move around on the web — by clicking on special text called hyperlinks which bring you to the next page. The fact that it is hyper just means it is not linear — i.e. you can go to any place on the Internet whenever you want by clicking on links — there is no set order to do things in.
Markup is what HTML tags do to the text inside them. They mark it as a certain type of text (italicised text, for example).
HTML is a Language, as it has code-words and syntax like any other language.
2. What is a tag?
In HTML, a tag tells the browser what to do. When you write an HTML page, you enter tags for many reasons — to change the appearance of text, to show a graphic, or to make a link to another page.

3. What is the simplest HTML page?
HTML Code:
<HTML>
<HEAD>
<TITLE>This is my page title! </TITLE>
</HEAD>
<BODY>
This is my message to the world!
</BODY>
</HTML>

Browser Display:
This is my message to the world!

4. How do I create frames? What is a frameset?
Frames allow an author to divide a browser window into multiple (rectangular) regions. Multiple documents can be displayed in a single window, each within its own frame. Graphical browsers allow these frames to be scrolled independently of each other, and links can update the document displayed in one frame without affecting the others.
You can’t just “add frames” to an existing document. Rather, you must create a frameset document that defines a particular combination of frames, and then display your content documents inside those frames. The frameset document should also include alternative non-framed content in a NOFRAMES element.
The HTML 4 frames model has significant design flaws that cause usability problems for web users. Frames should be used only with great care.

5. How can I include comments in HTML?
Technically, since HTML is an SGML application, HTML uses SGML comment syntax. However, the full syntax is complex, and browsers don’t support it in its entirety anyway. Therefore, use the following simplified rule to create HTML comments that both have valid syntax and work in browsers:

An HTML comment begins with “<!–“, ends with “–>”, and does not contain “–” or “>” anywhere in the comment.
The following are examples of HTML comments:

* <!– This is a comment. –>
* <!– This is another comment,
and it continues onto a second line. –>
* <!—->

Do not put comments inside tags (i.e., between “<” and “>”) in HTML markup.

6. What is a Hypertext link?
A hypertext link is a special tag that links one page to another page or resource. If you click the link, the browser jumps to the link’s destination.

7. How comfortable are you with writing HTML entirely by hand?
Very. I don’t usually use WYSIWYG. The only occasions when I do use Dreamweaver are when I want to draw something to see what it looks like, and then I’ll usually either take that design and hand-modify it or build it all over again from scratch in code. I have actually written my own desktop HTML IDE for Windows (it’s called Less Than Slash) with the intention of deploying it for use in web development training. If has built-in reference features, and will autocomplete code by parsing the DTD you specify in the file. That is to say, the program doesn’t know anything about HTML until after it parses the HTML DTD you specified. This should give you some idea of my skill level with HTML.

8. What is everyone using to write HTML?
Everyone has a different preference for which tool works best for them. Keep in mind that typically the less HTML the tool requires you to know, the worse the output of the HTML. In other words, you can always do it better by hand if you take the time to learn a little HTML.

9. What is a DOCTYPE? Which one do I use?
According to HTML standards, each HTML document begins with a DOCTYPE declaration that specifies which version of HTML the document uses. Originally, the DOCTYPE declaration was used only by SGML-based tools like HTML validators, which needed to determine which version of HTML a document used (or claimed to use).
Today, many browsers use the document’s DOCTYPE declaration to determine whether to use a stricter, more standards-oriented layout mode, or to use a “quirks” layout mode that attempts to emulate older, buggy browsers.

10. Can I nest tables within tables?
Yes, a table can be embedded inside a cell in another table. Here’s a simple example:

<table>
<tr>
<td>this is the first cell of the outer table</td>
<td>this is the second cell of the outer table,

with the inner table embedded in it
<table>
<tr>
<td>this is the first cell of the inner table</td>
<td>this is the second cell of the inner table</td>
</tr>
</table>
</td>
</tr>
</table>

The main caveat about nested tables is that older versions of Netscape Navigator have problems with them if you don’t explicitly close your TR, TD, and TH elements. To avoid problems, include every </tr>, </td>, and </th> tag, even though the HTML specifications don’t require them. Also, older versions of Netscape Navigator have problems with tables that are nested extremely deeply (e.g., tables nested ten deep). To avoid problems, avoid nesting tables more than a few deep. You may be able to use the ROWSPAN and COLSPAN attributes to minimize table nesting. Finally, be especially sure to validate your markup whenever you use nested tables.

11. How do I align a table to the right (or left)?
You can use <TABLE ALIGN=”right”> to float a table to the right. (Use ALIGN=”left” to float it to the left.) Any content that follows the closing </TABLE> tag will flow around the table. Use <BR CLEAR=”right”> or <BR CLEAR=”all”> to mark the end of the text that is to flow around the table, as shown in this example:

The table in this example will float to the right.
<table align=”right”>…</table>
This text will wrap to fill the available space to the left of (and if the text is long enough, below) the table.
<br clear=”right”>
This text will appear below the table, even if there is additional room to its left.

12. How can I use tables to structure forms?
Small forms are sometimes placed within a TD element within a table. This can be a useful for positioning a form relative to other content, but it doesn’t help position the form-related elements relative to each other.
To position form-related elements relative to each other, the entire table must be within the form. You cannot start a form in one TH or TD element and end in another. You cannot place the form within the table without placing it inside a TH or TD element. You can put the table inside the form, and then use the table to position the INPUT, TEXTAREA, SELECT, and other form-related elements, as shown in the following example.

<FORM ACTION=”[URL]”>
<TABLE BORDER=”0″>
<TR>
<TH>Account:</TH>
<TD><INPUT TYPE=”text” NAME=”account”></TD>
</TR>
<TR>
<TH>Password:</TH>
<TD><INPUT TYPE=”password” NAME=”password”></TD>
</TR>
<TR>
<TD> </TD>
<TD><INPUT TYPE=”submit” NAME=”Log On”></TD>
</TR>
</TABLE>
</FORM>

13. How do I center a table?
In your HTML, use

<div class=”center”>
<table>…</table>
</div>

In your CSS, use

div.center {
text-align: center;
}

div.center table {
margin-left: auto;
margin-right: auto;
text-align: left;
}

14. How do I use forms?
The basic syntax for a form is: <FORM ACTION=”[URL]”>…</FORM>
When the form is submitted, the form data is sent to the URL specified in the ACTION attribute. This URL should refer to a server-side (e.g., CGI) program that will process the form data. The form itself should contain

* at least one submit button (i.e., an <INPUT TYPE=”submit” …> element),
* form data elements (e.g., <INPUT>, <TEXTAREA>, and <SELECT>) as needed, and
* additional markup (e.g., identifying data elements, presenting instructions) as needed.

15. How can I check for errors?
HTML validators check HTML documents against a formal definition of HTML syntax and then output a list of errors. Validation is important to give the best chance of correctness on unknown browsers (both existing browsers that you haven’t seen and future browsers that haven’t been written yet).
HTML checkers (linters) are also useful. These programs check documents for specific problems, including some caused by invalid markup and others caused by common browser bugs. Checkers may pass some invalid documents, and they may fail some valid ones.
All validators are functionally equivalent; while their reporting styles may vary, they will find the same errors given identical input. Different checkers are programmed to look for different problems, so their reports will vary significantly from each other. Also, some programs that are called validators (e.g. the “CSE HTML Validator”) are really linters/checkers. They are still useful, but they should not be confused with real HTML validators.
When checking a site for errors for the first time, it is often useful to identify common problems that occur repeatedly in your markup. Fix these problems everywhere they occur (with an automated process if possible), and then go back to identify and fix the remaining problems.
Link checkers follow all the links on a site and report which ones are no longer functioning. CSS checkers report problems with CSS style sheets.

16. Do I have to memorize a bunch of tags?
No. Most programs that help you write HTML code already know most tags, and create them when you press a button. But you should understand what a tag is, and how it works. That way you can correct errors in your page more easily.

17. How do I make a form so it can be submitted by hitting ENTER?
The short answer is that the form should just have one <INPUT TYPE=TEXT> and no TEXTAREA, though it can have other form elements like checkboxes and radio buttons.

18. How do I set the focus to the first form field?
You cannot do this with HTML. However, you can include a script after the form that sets the focus to the appropriate field, like this:

<form id=”myform” name=”myform” action=…>
<input type=”text” id=”myinput” name=”myinput” …>
</form>

<script type=”text/javascript”>
document.myform.myinput.focus();
</script>

A similar approach uses <body onload=…> to set the focus, but some browsers seem to process the ONLOAD event before the entire document (i.e., the part with the form) has been loaded.

19. How can I eliminate the extra space after a </form> tag?
HTML has no mechanism to control this. However, with CSS, you can set the margin-bottom of the form to 0. For example:
<form style=”margin-bottom:0;” action=…>

You can also use a CSS style sheet to affect all the forms on a page:
form { margin-bottom: 0 ; }

20. How can I use tables to structure forms?
Small forms are sometimes placed within a TD element within a table. This can be a useful for positioning a form relative to other content, but it doesn’t help position the form-related elements relative to each other.
To position form-related elements relative to each other, the entire table must be within the form. You cannot start a form in one TH or TD element and end in another. You cannot place the form within the table without placing it inside a TH or TD element. You can put the table inside the form, and then use the table to position the INPUT, TEXTAREA, SELECT, and other form-related elements, as shown in the following example.
<form action=”[URL]”>
<table border=”0″>
<tr>
<th scope=”row”>
<label for=”account”>Account:</label>
</th>
<td>
<input type=”text” name=”account” id=”account”>
</td>
</tr>
<tr>
<th scope=”row”>
<label for=”password”>Password:
</th>
<td>
<input type=”password” name=”password” id=”password”>
</td>
</tr>
<tr>
<td> </td>
<td><input type=”submit” name=”Log On”></td>
</tr>
</table>
</form>

21. How can I show HTML examples without them being interpreted as part of my document?
Within the HTML example, first replace the “&” character with “&amp;” everywhere it occurs. Then replace the “&lt;” character with “<” and the “&gt;” character with “>” in the same way.
Note that it may be appropriate to use the CODE and/or PRE elements when displaying HTML examples.

22. How do I get special characters in my HTML?
The special case of the less-than (‘<‘), greater-than (‘>’), and ampersand (‘&’) characters. In general, the safest way to write HTML is in US-ASCII (ANSI X3.4, a 7-bit code), expressing characters from the upper half of the 8-bit code by using HTML entities.
Working with 8-bit characters can also be successful in many practical situations: Unix and MS-Windows (using Latin-1), and also Macs (with some reservations).
Latin-1 (ISO-8859-1) is intended for English, French, German, Spanish, Portuguese, and various other western European languages. (It is inadequate for many languages of central and eastern Europe and elsewhere, let alone for languages not written in the Roman alphabet.) On the Web, these are the only characters reliably supported. In particular, characters 128 through 159 as used in MS-Windows are not part of the ISO-8859-1 code set and will not be displayed as Windows users expect. These characters include the em dash, en dash, curly quotes, bullet, and trademark symbol; neither the actual character (the single byte) nor its ?nnn; decimal equivalent is correct in HTML. Also, ISO-8859-1 does not include the Euro currency character. (See the last paragraph of this answer for more about such characters.)
On platforms whose own character code isn’t ISO-8859-1, such as MS-DOS and Mac OS, there may be problems: you have to use text transfer methods that convert between the platform’s own code and ISO-8859-1 (e.g., Fetch for the Mac), or convert separately (e.g., GNU recode). Using 7-bit ASCII with entities avoids those problems, but this FAQ is too small to cover other possibilities in detail.
If you run a web server (httpd) on a platform whose own character code isn’t ISO-8859-1, such as a Mac or an IBM mainframe, then it’s the job of the server to convert text documents into ISO-8859-1 code when sending them to the network.
If you want to use characters not in ISO-8859-1, you must use HTML 4 or XHTML rather than HTML 3.2, choose an appropriate alternative character set (and for certain character sets, choose the encoding system too), and use one method or other of specifying this.

23. Should I put quotes around attribute values?
It is never wrong to quote attribute values, and many people recommend quoting all attribute values even when the quotation marks are technically optional. XHTML 1.0 requires all attribute values to be quoted. Like previous HTML specifications, HTML 4 allows attribute values to remain unquoted in many circumstances (e.g., when the value contains only letters and digits).
Be careful when your attribute value includes double quotes, for instance when you want ALT text like “the “King of Comedy” takes a bow” for an image. Humans can parse that to know where the quoted material ends, but browsers can’t. You have to code the attribute value specially so that the first interior quote doesn’t terminate the value prematurely. There are two main techniques:

* Escape any quotes inside the value with &#34; so you don’t terminate the value prematurely: ALT=”the &#34;King of Comedy&#34; takes a bow”.
* Use single quotes to enclose the attribute value: ALT=’the “King of Comedy” takes a bow’.

Both these methods are correct according to the specification and are supported by current browsers, but both were poorly supported in some earlier browsers. The only truly safe advice is to rewrite the text so that the attribute value need not contain quotes, or to change the interior double quotes to single quotes, like this: ALT=”the ‘King of Comedy’ takes a bow”.
Posting Copy and Paste HTML
For those wanting to post direct Copy and Paste HTML on screen without the use of spaces or *s etc. and the need to explain those substitutions: Use &lt; to substitute for each opening tag < in each tagged set of HTML. Example, typing the following: &lt;a href=”http://www.yourname.com”>&lt;img src=”http://pics.yourname.com/aw/pics/mask.gif”>&lt;/a> Will show up on screen as: <a href=”http://www.yourname.com”><img src=”http://pics.yourname.com/aw/pics/mask.gif”></a>
HTML for Lists
1. Bulleted Lists: <ul> begins a bulleted, indented list. Each item in the list is then prefaced with the <li> tag. It is not necessary to insert a break at the end of each line — the <li> tag automatically creates a new line.

* with <li type=disc>
* with <li type=square>
* with <li type=circle>

2. Numbered Lists: <ol> begins a numbered, indented list. Each item in the list is then prefaced with the <li> tag. You need to close the list with the </ol> tag. Note: You can expand the <ol> to specify the TYPE of numbering:

<ol> 1 (decimal numbers: 1, 2, 3, 4, 5, …)
<ol type=”a”> a (lowercase alphabetic: a, b, c, d, e, …)
<ol type=”A”> A (uppercase alphabetic: A, B, C, D, E, …)
<ol type=”i”> i (lowercase Roman numerals: i, ii, iii, iv, v, …)
<ol type=”I”> I (uppercase Roman numerals: I, II, III, IV, V, …)

24. Are there any problems with using tables for layout?
On current browsers, the entire table must be downloaded and the dimensions of everything in the table must to be known before the table can be rendered. That can delay the rendering of your content, especially if your table contains images without HEIGHT or WIDTH attributes.
If any of your table’s content is too wide for the available display area, then the table stretches to accomodate the oversized content. The rest of the content then adjusts to fit the oversized table rather than fitting the available display area. This can force your readers to scroll horizontally to read your content, or can cause printed versions to be cropped.
For readers whose displays are narrower than the author anticipated, fixed-width tables cause the same problems as other oversized tables. For readers whose displays are wider than the author anticipated, fixed-width tables cause extremely wide margins, wasting much of the display area. For readers who need larger fonts, fixed-width tables can cause the content to be displayed in short choppy lines of only a few words each.
Many browsers are especially sensitive to invalid syntax when tables are involved. Correct syntax is especially critical. Even with correct syntax, nested tables may not display correctly in older versions of Netscape Navigator.
Some browsers ignore tables, or can be configured to ignore tables. These browsers will ignore any layout you’ve created with tables. Also, search engines ignore tables. Some search engines use the text at the beginning of a document to summarize it when it appears in search results, and some index only the first n bytes of a document. When tables are used for layout, the beginning of a document often contains many navigation links that appear before than actual content.
Many versions of Navigator have problems linking to named anchors when they are inside a table that uses the ALIGN attribute. These browsers seem to associate the named anchor with the top of the table, rather than with the content of the anchor. You can avoid this problem by not using the ALIGN attribute on your tables.
If you use tables for layout, you can still minimize the related problems with careful markup. Avoid placing wide images, PRE elements with long lines, long URLs, or other wide content inside tables. Rather than a single full-page layout table, use several independent tables. For example, you could use a table to lay out a navigation bar at the top/bottom of the page, and leave the main content completely outside any layout tables.

25. How do I eliminate the blue border around linked images?
In your HTML, you can specify the BORDER attribute for the image:
<a href=…><img src=… alt=… border=”0″></a>
However, note that removing the border that indicates an image is a link makes it harder for users to distinguish quickly and easily which images on a web page are clickable.

26. How do I eliminate the space around/between my images?
If your images are inside a table, be sure to set the BORDER, CELLSPACING, and CELLPADDING attributes to 0.
Extra space between images is often created by whitespace around the <IMG> tag in the markup. It is safe to use newlines inside a tag (between attributes), but not between two tags. For example, replace this:

<td …>
<img src=… alt=…>
<img src=… alt=…>
</td>

with this:

<td …><img src=… alt=…><img src=… alt=…></td>

According to the latest specifications, the two should be equivalent. However, common browsers do not comply with the specifications in this situation.
Finally, extra space between images can appear in documents that trigger the “standards” rendering mode of Gecko-based browsers like Mozilla and Firefox.

27. How can I specify colors?
If you want others to view your web page with specific colors, the most appropriate way is to suggest the colors with a style sheet. Cascading Style Sheets use the color and background-color properties to specify text and background colors. To avoid conflicts between the reader’s default colors and those suggested by the author, these two properties should always be used together.
With HTML, you can suggest colors with the TEXT, LINK, VLINK (visited link), ALINK (active link), and BGCOLOR (background color) attributes of the BODY element.
Note that these attributes are deprecated by HTML 4. Also, if one of these attributes is used, then all of them should be used to ensure that the reader’s default colors do not interfere with those suggested by the author. Here is an example:
<body bgcolor=”#ffffff” text=”#000000″ link=”#0000ff” vlink=”#800080″ alink=”#000080″>
Authors should not rely on the specified colors since browsers allow their users to override document-specified colors.

28. How do I get form data emailed to me?
The only reliable mechanism for processing form submissions is with a server-side (e.g., CGI) program. To send form data to yourself via email, you should use a server-side program that processes the form submission and sends the data to your email address.
Some web service providers make standard form-to-email programs available to their customers. Check with your service provider for details.
If you can install CGI programs on your own server, see the answer to the previous question for a list of useful resources.
If you can’t run CGI programs on your own server, you can use a remotely hosted form-to-email services. Note that the provider of a remotely hosted service will have access to any data submitted via the service.
Forms that use action=”mailto:…” are unreliable. According to the HTML specifications, form behavior is explicitly undefined for mailto URIs (or anything else other than HTTP URIs). They may work one way with one software configuration, may work other ways in other software configurations, and may fail completely in other software configurations.

29. Can I prevent a form from being submitted again?
No. The server-side (e.g., CGI) program that processes the form submission must handle duplicate submissions gracefully.
You could generate the form with a server-side (e.g., CGI) program that adds a hidden field with a unique session ID. Then the server-side program that processes the form submission can check the session ID against a list of previously used session IDs. If the session ID has already been used, then an appropriate action can be taken (e.g., reject the submission, or update the previously submitted data).
Ultimately, your server-side program must be smart enough to handle resubmitted data. But you can avoid getting resubmitted data by not expiring the confirmation page from form submissions. Since you want to expire pages quickly when they have transient data, you might want to avoid putting transient data on the confirmation page. You could provide a link to a database query that returns transient data though.

30. How can I allow file uploads to my web site?
These things are necessary for Web-based uploads:

* An HTTP server that accepts uploads.
* Access to the /cgi-bin/ to put the receiving script. Prewritten CGI file-upload scripts are available.
* A form implemented something like this:

<form method=”post” enctype=”multipart/form-data” action=”fup.cgi”>
File to upload: <input type=file name=upfile><br>
Notes about the file: <input type=text name=note><br>
<input type=submit value=Press> to upload the file!
</form>

Not all browsers support form-based file upload, so try to give alternatives where possible.

The Perl CGI.pm module supports file upload. The most recent versions of the cgi-lib.pl library also support file upload. Also, if you need to do file upload in conjunction with form-to-email, the Perl package MIME::Lite handles email attachments.

31. How can I require that fields be filled in, or filled in correctly?
Have the server-side (e.g., CGI) program that processes the form submission send an error message if the field is not filled in properly. Ideally, this error message should include a copy of the original form with the original (incomplete or incorrect) data filled in as the default values for the form fields. The Perl CGI.pm module provides helpful mechanisms for returning partially completed forms to the user.
In addition, you could use JavaScript in the form’s ONSUBMIT attribute to check the form data. If JavaScript support is enabled, then the ONSUBMIT event handler can inform the user of the problem and return false to prevent the form from being submitted.
Note that the server-side program should not rely upon the checking done by the client-side script.

32. How do I change the title of a framed document?
The title displayed is the title of the frameset document rather than the titles of any of the pages within frames. To change the title displayed, link to a new frameset document using TARGET=”_top” (replacing the entire frameset).

33. How do I link an image to something?
Just use the image as the link content, like this:

<a href=…><img src=… alt=…></a>
Should I end my URLs with a slash?
The URL structure defines a hierarchy similar to a filesystem’s hierarchy of subdirectories or folders. The segments of a URL are separated by slash characters (“/”). When navigating the URL hierarchy, the final segment of the URL (i.e., everything after the final slash) is similar to a file in a filesystem. The other segments of the URL are similar to the subdirectories and folders in a filesystem.
When resolving relative URLs (see the answer to the previous question), the browser’s first step is to strip everything after the last slash in the URL of the current document. If the current document’s URL ends with a slash, then the final segment (the “file”) of the URL is null. If you remove the final slash, then the final segment of the URL is no longer null; it is whatever follows the final remaining slash in the URL. Removing the slash changes the URL; the modified URL refers to a different document and relative URLs will resolve differently.
For example, the final segment of the URL http://www.mysite.com/faq/html/ is empty; there is nothing after the final slash. In this document, the relative URL all.html resolves to http://www.mysite.com/faq/html/all.html (an existing document). If the final slash is omitted, then the final segment of the modified URL http://www.mysite.com/faq/html is “html”. In this (nonexistent) document, the relative URL all.html would resolve to http://www.mysite.com/faq/all.html (another nonexistent document).
When they receive a request that is missing its final slash, web servers cannot ignore the missing slash and just send the document anyway. Doing so would break any relative URLs in the document. Normally, servers are configured to send a redirection message when they receive such a request. In response to the redirection message, the browser requests the correct URL, and then the server sends the requested document. (By the way, the browser does not and cannot correct the URL on its own; only the server can determine whether the URL is missing its final slash.)
This error-correction process means that URLs without their final slash will still work. However, this process wastes time and network resources. If you include the final slash when it is appropriate, then browsers won’t need to send a second request to the server.
The exception is when you refer to a URL with just a hostname (e.g., http://www.mysite.com). In this case, the browser will assume that you want the main index (“/”) from the server, and you do not have to include the final slash. However, many regard it as good style to include it anyway.

34. How do I specify a specific combination of frames instead of the default document?
This is unfortunately not possible. When you navigate through a site using frames, the URL will not change as the documents in the individual frames change. This means that there is no way to indicate the combination of documents that make up the current state of the frameset.
The author can provide multiple frameset documents, one for each combination of frame content. These frameset documents can be generated automatically, perhaps being created on the fly by a CGI program. Rather than linking to individual content documents, the author can link to these separate frameset documents using TARGET=”_top”. Thus, the URL of the current frameset document will always specify the combination of frames being displayed, which allows links, bookmarks, etc. to function normally.

35. How do I link to a location in the middle of an HTML document?
First, label the destination of the link. The old way to label the destination of the link was with an anchor using the NAME attribute. For example:
<h2><a name=”section2″>Section 2: Beyond Introductions</a></h2>

The modern way to label the destination of the link is with an ID attribute. For example:
<h2 id=”section2″>Section 2: Beyond Introductions</h2>

Second, link to the labeled destination. The URL is the URL of the document, with “#” and the value of the NAME or ID attribute appended. Continuing the above examples, elsewhere in the same document you could use:
<a href=”#section2″>go to Section 2</a>

Similarly, in another document you could use:
<a href=”thesis.html#section2″>go to Section 2 of my thesis</a>

36. How do I create a link?
Use an anchor element. The HREF attribute specifies the URL of the document that you want to link to. The following example links the text “Web Authoring FAQ” to <URL:http://www.htmlhelp.com/faq/html/>:
<A HREF=”http://www.yoursite.com/faq/html/”>Web Authoring FAQ</A>

37. How do I create a link that opens a new window?
<a target=”_blank” href=…> opens a new, unnamed window.
<a target=”example” href=…> opens a new window named “example”, provided that a window or frame by that name does not already exist.
Note that the TARGET attribute is not part of HTML 4 Strict. In HTML 4 Strict, new windows can be created only with JavaScript. links that open new windows can be annoying to your readers if there is not a good reason for them.

38. How do I let people download a file from my page?
Once the file is uploaded to the server, you need only use an anchor reference tag to link to it. An example would be:
<a href=”../files/foo.zip”>Download Foo Now! (100kb ZIP)</a>
How do I create a button which acts like a link?
This is best done with a small form:

<FORM ACTION=”[URL]” METHOD=GET>
<INPUT TYPE=submit VALUE=”Text on button”>
</FORM>

If you want to line up buttons next to each other, you will have to put them in a one-row table, with each button in a separate cell.
Note that search engines might not find the target document unless there is a normal link somewhere else on the page.
A go-to-other-page button can also be coded in JavaScript, but the above is standard HTML and works for more readers.

39. How can I make a form with custom buttons?
Rather than a normal submit button (<input type=”submit” …>), you can use the image input type (<input type=”image” …>). The image input type specifies a graphical submit button that functions like a server-side image map.
Unlike normal submit buttons (which return a name=value pair), the image input type returns the x-y coordinates of the location where the user clicked on the image. The browser returns the x-y coordinates as name.x=000 and name.y=000 pairs.
For compatability with various non-graphical browsing environments, the VALUE and ALT attributes should be set to the same value as the NAME attribute. For example:
<input type=”image” name=”Send” alt=”Send” value=”Send” src=”send-button.gif”>
For the reset button, one could use <button type=”reset” …>, JavaScript, and/or style sheets, although none of these mechanisms work universally.

40. How do I specify page breaks in HTML?
There is no way in standard HTML to specify where page breaks will occur when printing a page. HTML was designed to be a device-independent structural definition language, and page breaks depend on things like the fonts and paper size that the person viewing the page is using.

41. How do I remove the border around frames?
Removing the border around frames involves both not drawing the frame borders and eliminating the space between the frames. The most widely supported way to display borderless frames is <FRAMESET … BORDER=0 FRAMEBORDER=0 FRAMESPACING=0>.
Note that these attributes are proprietary and not part of the HTML 4.01 specifications. (HTML 4.01 does define the FRAMEBORDER attribute for the FRAME element, but not for the FRAMESET element.) Also, removing the border around a frame makes it difficult to resize it, as this border is also used in most GUIs to change the size of the frame.

42. Which should I use, &entityname; or &#number; ?
In HTML, characters can be represented in three ways:

1. a properly coded character, in the encoding specified by the “charset” attribute of the “Content-type:” header;
2. a character entity (&entityname;), from the appropriate HTML specification (HTML 2.0/3.2, HTML 4, etc.);
3. a numeric character reference (&#number;) that specifies the Unicode reference of the desired character. We recommend using decimal references; hexadecimal references are less widely supported.

In theory these representations are equally valid. In practice, authoring convenience and limited support by browsers complicate the issue.

HTTP being a guaranteed “8-bit clean” protocol, you can safely send out 8-bit or multibyte coded characters, in the various codings that are supported by browsers.
A. HTML 2.0/3.2 (Latin-1)

By now there seems no convincing reason to choose &entityname; versus &#number;, so use whichever is convenient.
If you can confidently handle 8-bit-coded characters this is fine too, probably preferred for writing heavily-accented languages. Take care if authoring on non-ISO-8859-based platforms such as Mac, Psion, IBM mainframes etc., that your upload technique delivers a correctly coded document to the server. Using &amp;-representations avoids such problems.
B. A single repertoire other than Latin-1

In such codings as ISO-8859-7 Greek, koi8-r Russian Cyrillic, and Chinese, Japanese and Korean (CJK) codings, use of coded characters is the most widely supported and used technique.

Although not covered by HTML 3.2, browsers have supported this quite widely for some time now; it is a valid option within the HTML 4 specifications–use a validator such as the WDG HTML Validator or the W3C HTML Validation Service which supports HTML 4 and understands different character encodings.

Browser support for coded characters may depend on configuration and font resources. In some cases, additional programs called “helpers” or “add-ins” supply virtual fonts to browsers.

“Add-in” programs have in the past been used to support numeric references to 15-bit or 16-bit code protocols such as Chinese Big5 or Chinese GB2312.

In theory you should be able to include not only coded characters but also Unicode numeric character references, but browser support is generally poor. Numeric references to the “charset-specified” encoding may appear to produce the desired characters on some browsers, but this is wrong behavior and should not be used. Character entities are also problematical, aside from the HTML-significant characters <, &amp; etc.

C. Internationalization per HTML 4

Recent versions of the popular browsers have support for some of these features, but at time of writing it seems unwise to rely on this when authoring for a general audience.

43. Is there a way to prevent getting framed?
“Getting framed” refers to having your documents displayed within someone else’s frameset without your permission. This can happen accidentally (the frameset author forgot to use TARGET=”_top” when linking to your document) or intentionally (the frameset author wanted to display your content with his/her own navigation or banner frames).

To avoid “framing” other people’s documents, you must add TARGET=”_top” to all links that lead to documents outside your intended scope.
Unfortunately, there is no reliable way to specify that a particular document should be displayed in the full browser window, rather than in the current frame. One workaround is to use <BASE TARGET=”_top”> in the document, but this only specifies the default target frame for links in the current document, not for the document itself.

If the reader’s browser has JavaScript enabled, the following script will automatically remove any existing framesets:
<script type=”text/javascript”>
if (top.frames.length!=0) {
if (window.location.href.replace)
top.location.replace(self.location.href);
else
top.location.href=self.document.href;
}
</script>

An alternative script is

<script type=”text/javascript”>
function breakOut() {
if (self != top)
window.open(“my URL”,”_top”,””);
}
</script>
</HEAD>
<BODY onLoad=”breakOut()”>

44. Why aren’t my frames the exact size I specified?
Older versions of Netscape Navigator seems to convert pixel-based frame dimensions to whole percentages, and to use those percentage-based dimensions when laying out the frames. Thus, frames with pixel-based dimensions will be rendered with a slightly different size than that specified in the frameset document. The rounding error will vary depending on the exact size of the browser window.
Furthermore, Navigator seems to store the percentage-based dimensions internally, rather than the original pixel-based dimensions. Thus, when a window is resized, the frames are redrawn based on the new window size and the old percentage-based dimensions.
There is no way to prevent this behavior. To accommodate it, you should design your site to adapt to variations in the frame dimensions. This is another situation where it is a good idea to accommodate variations in the browser’s presentation.

45. How can I specify background images?
With HTML, you can suggest a background image with the BACKGROUND attribute of the BODY element. Here is an example:
<body background=”imagefile.gif” bgcolor=”#ffffff” text=”#000000″ link=”#0000ff” vlink=”#800080″ alink=”#000080″>
If you specify a background image, you should also specify text, link, and background colors since the reader’s default colors may not provide adequate contrast against your background image. The background color may be used by those not using your background image. Authors should not rely on the specified background image since browsers allow their users to disable image loading or to override document-specified backgrounds.

46. How can I copy something from a webpage to my webpage?
1: Plaintext or any text information viewable from your browser can be easily copied like any other text from any other file.
2; HTML and web scripts – you will need to view the web page’s source code. In the page’s source code, copying the <script> and </script> tags as well as all the information in-between these tags will usually enable the script to work on your web page.
3: Images, sounds, or movies – Almost all images, sounds, and movies can be copied to your computer and then viewed on your webpage. Images can be easily copied from a webpage by right-clicking an image and selecting “Save Picture as” or “Save Image as”. Unless the sound or movies file has a direct link to download and save the file to a specified location on your hard disk drive or to view your Internet browser’s cache and locate the sound or movie file saved in the cache.
4. Embedded objects – Looking at the source code of the object to determine the name of the file and how it is loaded, and copy both the code and the file.

47. Is it possible to make the HTML source not viewable?
In short, there is no real method or script for making standard HTML source code not viewable. You may consider doing any of the below if they are concerned about your source code.
1. Create the web page in Macromedia Flash or a similar program. The visitor would need to download the Macromedia Flash plug-in and would be unable to view the source code for the flash applet.
2. There are various scripts that will disable the right click feature, preventing the user from saving images or viewing the source. However, this will not protect the source code of your page. For example, Internet Explorer users may still click “View” and “Source” to view the source code of the page, or a user could disable scripts and images can be saved by simply saving the web page to the hard drive.
3. There are several programs that will help scramble your code, making it difficult (not impossible) to read. Again, this is not going to prevent someone from viewing your code.

48. Why doesn’t my title show up when I click “check it out”?
You’re probably looking at the wrong part of the screen. The Title usually shows up in the Title Bar on the Window, to the left of the minimize/maximize buttons on graphical browsers.

49. How do I make a thumbnail for my image(s)?
Thumbnails are very useful, but they take a little bit of time to make. All you need is a graphics editing program that has functions to resize an image (sometimes it’s under a function called image attributes). Be advised–when you have made a thumbnail, you will need to save it as something different than the original. Also, you will generally want to link to the larger graphic when you are done.

Here are the steps:
1. Load a copy of the image into your graphics editing program.
2. Determine the ratio the thumbnail to be. (Do you want it to be half the size? One third of the size? One quarter of the size? One tenth of the size?)
3. Find the resize (or change attributes) function of your program. Most programs will recogize a percentage, for example you can type in 25% for height and width if you want the thumbnail to be a quarter of the size. (It it doesn’t do percentages, you can calculate it by multiplying the pixels by the percentage. If you have a graphic that is 400 by 100, and you want it 25% of the size, multiple each measurement by .25. In this case, you’ll get 100 and 25.)
4. Once you are satisfied with the thumbnail, think of a name for the image. Choose Save As and enter that name. (Tip: I like to just add t after the image name. For taco.jpg I’d use tacot.jpg)
5. Upload the image to your site, and edit your HTML to load the new image name with the new, smaller size. If you wish, you can link to the larger image around the image.

Example: You have taco.jpg which is 400 pixels wide and 100 pixels high. You made a thumbnail of it called tacot.jpg, which is now 100 pixels wide and 25 pixels high. After you have both images uploaded, here’s the code:

<a href=”taco.jpg”><img src=”tacot.jpg” width=100 height=25 border=0 alt=”click for larger taco”></a>
You’ll find border=0 to be helpful in eliminating a link-colored box around your thumbnail.

50. What is the difference between the HTML form methods GET and POST?
The method parameter specifies which method the client is using to send information to the WEB server. The method determines which parameter you will find the CGI request data in:

* POST – post_args
* GET – httpargs

Leave a Reply

Your email address will not be published. Required fields are marked *